NewsRhzhi | 先创资讯 | 旧版入口
rhzhi.net
网站首页 | NewsRhzhi | 先创资讯 | 操作系统 | 工具软件 | 办公软件 | 网站设计 | 组网专栏 | 平面设计 | 多 媒 体 | 程序开发 | 硬件资料 | 聊天软件
您现在的位置: 先创网 >> 网络应用 >> 组网技术 >> 文章正文
Cisco交换机基本命令配置大全
eNet论坛
2008-6-17 12:31:33文/佚名
    

51. 当某个交换机的第3层交换失效时,可在交换机的特权模式下输入下列命令:

switch(enable) set mls enable

52. 若想改变老化时间的值,可在特权模式下输入以下命令:

switch(enable) set mls agingtime agingtime

53. 设置快速老化:

switch(enable) set mls agingtime fast fastagingtime pkt_threshold

54. 确定那些MLS-RP和MLS-SE参与了MLS,可先显示交换机引用列表中的内容再确定:

switch(enable) show mls include

55. 显示MLS高速缓存记录:

switch(enable) show mls entry

56. 用命令show in arp显示ARP高速缓存区的内容。

57. 要把路由器配置为HSRP备份组的成员,可以在接口配置模式下使用下面的命令:

router(config-if)# standby group-number ip ip-address

58. 为了使一个路由器重新恢复转发路由器的角色,在接口配置模式下:

router(config-if)# standy group-number preempt

59. 访问时间和保持时间参数是可配置的:

router(config-if)# standy group-number timers hellotime holdtime

60. 配置HSRP跟踪:

router(config-if)# standy group-number track type-number interface-priority

61. 要显示HSRP路由器的状态:

router# show standby type-number group brief

62. 用命令show ip igmp确定当选的查询器。

63. 启动IP组播路由选择:

router(config)# ip muticast-routing

64. 启动接口上的PIM:

dalllasr1>(config-if)# ip pim {dense-mode sparse-mode sparse-dense-mode}

65. 启动稀疏-稠密模式下的PIM:

router# ip multicast-routing

router# interface type number

router# ip pim sparse-dense-mode

66. 核实PIM的配置:

dallasr1># show ip pim interface[type number] [count]

67. 显示PIM邻居:

dallasr1># show ip neighbor type number

68. 为了配置RP的地址,命令如下:

dallasr1># ip pim rp-address ip-address [group-access-list-number][override]

69. 选择一个默认的RP:

dallasr1># ip pim rp-address

通告RP和它所服务的组范围:

dallasr1># ip pim send-rp-announce type number scope ttl group-list access-list-number

为管理范围组通告RP的地址:

dallasr1># ip pim send-rp-announce ethernet0 scope 16 group-list1

dallasr1># access-list 1 permit 266.0.0.0 0.255.255.255

设定一个RP映像代理:

dallasr1># ip pim send-rp-discovery scope ttl

核实组到RP的映像:

dallasr1># show ip pim rp mapping

dallasr1># show ip pim rp [group-name group-address] [mapping]

70. 在路由器接口上用命令ip multicast ttl-threshold ttl-value设定TTL阀值:

dallasr1>(config-if)# ip multicast ttl-threshold ttl-value


上一页  [1] [2] [3] [4] [5] [6] [7] 下一页

打印此页 投稿与建议 返回顶部
栏 目 索 引
软件应用 SOFTWARE
Win XP | NT/2003
Win2000 | DOS/Win9x
PowerPoint | Office
Excel | Word
网络软件 | 实用软件
媒体软件 | 系统软件
常用软件 | 办公软件
聊天软件 | 网络安全
新软试用 | Vista
设计在线 DESIGN
Dreamweaver | 3DMax
Photoshop | Flash
平面设计 | 网页设计
多 媒 体 | 精品画廊
精彩专区 SPECIAL
Q Q 专区 | 热门专题
组网玩网 | 程序开发
应用集锦 |
相关文章
关于我们 - 联系方式 - 合作伙伴 - 网站大事记 - 网站地图 - 我要投稿
Copyright ©1997-2008 先创网 All Rights Reserved.
先创科技 版权所有